🔍
UL 87A

UL 87A

Original price was: $502.00.Current price is: $301.00.

Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85)

Published by Publication Date Number of Pages
UL 2015 –

UL 87A – Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85)

Please note: All interim revisions for this edition available at time of your purchase will be included.

Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85)
UL 87A
1 Scope

1.1 These requirements apply to power-operated dispensing devices rated 600 V ac or less for use with motor fuels. Motor fuels as defined by these requirements include one or more of the fuels described in 1.2.

1.2 Dispensing devices covered by these requirements are intended for use with one or more of the following:

  • a) Gasoline formulated in accordance with the Standard Specification for Automotive Spark-Ignition Fuel ASTM D4814;
  • b) Gasoline/ethanol blends with nominal ethanol concentrations up to 25 percent ethanol (E25) consisting of gasoline formulated in accordance with the Standard Specification for Automotive Spark-Ignition Fuel ASTM D4814 when blended with denatured fuel ethanol formulated to be consistent with the Standard Specification for Denatured Fuel Ethanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel ASTM D4806; or
  • c) Gasoline/ethanol blends with nominal ethanol concentrations above 25 percent formulated in accordance with the Standard Specifications in item (b) or formulated in accordance with the Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines ASTM D5798 as applicable.

1.3 Requirements for the installation and use of dispensing devices are included in the Code for Motor Fuel Dispensing Facilities and Repair Garages ANSI/NFPA 30A and the National Electrical Code ANSI/NFPA 70.

1.4 These requirements apply to wiring methods used to install or interconnect such control equipment when the equipment is located directly on or within the housing of the dispensing device.

1.5 These requirements do not apply to control equipment that may authorize monitor or interrupt operation of a power-operated dispensing device nor other auxiliary equipment. These products would be covered under the Standard for Control Equipment for Use with Flammable Liquid Dispensing Devices UL 1238.

1.6 These requirements do not cover dispensing devices for use with diesel fuel biodiesel fuel diesel/biodiesel fuel blends fuel oil or kerosene which are covered in the Standard for Power-Operated Dispensing Devices for Diesel Fuel Biodiesel Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20) Kerosene and Fuel Oil UL 87B.

1.7 These requirements do not cover dispensing devices for use with LP-Gas which are covered under the Standard for Power-Operated Dispensing Devices for LP-Gas UL 495.

Product Details

Edition:
1
Published:
02/13/2015
Note:
This product is unavailable in Ukraine Russia Belarus

Related products